SIS630 Video controller with up to 32MB shared video ram

Soundblaster Pro compatible sound system with AC97, direct sound 3D support

Built in 56k fax/modem and 10/100 base network ethernet

1 x parallel, 2 x audio jacks, 1 x monitor, 1 x PS/2, 2 x USB, 1 x fax modem jack, 1 x 10/100 Base T LAN

UK PS/2 keyboard, Trackpad

300mm x 245mm x 38mm (WxDxH)

Supplied with Microsoft Windows XP home software

UK Power cord and Power Unit

To enter BIOS press the keys    ctrl - alt - s    together while starting up

To replace Cmos bios battery you will need to remove the keyboard by putting a sharp knife into the holding spring at the top of the keyboard one either side and one in the middle, then pull the keyboard forward and then remove the four circled screws are removed, place your finger nail or flat-headed screwdriver gently underneath the plates bottom edge, lift the plate slightly, being careful of the fan's power cable, taking hold of the plate, gently pull it down towards you until the top of the plate comes away from the chassis, the plate can now be gently folded back on top of the keyboard. The battery is there and is a standard CR2032

I-Friend Hyunju NC122i4 drivers available in 2 downloads sound and modem and video

Power supply part number PA-1900 (standard one pin jack connector, 19v, 90W)

Lithium-Ion Battery 5400mAh - Battery replacement model numbers:- DR202, SMP202, EMC202, SMP202, D4031A, ST202S, ME202BB, SL202, SSB-500EL, SSB650ELS, SSB650, DR36, SL36, DR202, NE2020

128mb 144pin SODIMM 3.3v, supports a maximum of 512Mb

Ram upgrade information - The NC122i4 takes SODIMM 144pin x64 PC133 3.3v RAM modules up to a maximum of 512mb in its one socket. It is best to use x64 rather than x32, although please bear in mind that not all types will be fully compatible. I personally tried a few different makes myself and none worked until I used the crucial online scanner that unfortunately doesn't work for this product but they emailed all the correct details after getting further detailed information. The part numbers given by them are below click each one for more information and price direct from crucial or use the part number starting CT to find cheaper on eBay:- The following part numbers should be compatible.

128MB - CT16M64S4W7E

256MB - CT32M64S4W7E

512MB - CT64M64S4W75

Ram can be access using a small screwdriver on the square removable metal panel on the bottom of the laptop

UK PS/2 keyboard, Trackpad

332mm x 273mm x 45mm (WxDxH)

Supplied with Microsoft Windows XP home software

UK Power cord and Power Unit

To enter BIOS press the keys    ctrl - alt - s    together while starting up,

To replace Cmos bios battery you will need to remove the covering panel and loosen the two screws holding the keyboard in place and on folding the keyboard forward the battery is there and is a standard CR2032

All the I-Friend Hyunju NC202i4 drivers available in one download file click here to download

Power supply part number 9NA0900154 (4 pin jack connector, 18.5v, 90W)

Lithium-Ion Battery 6000 mAh - Battery replacement model numbers:- Movita Bravo 700, B-750sb,  B750, B750-SB, B750SB and B750SB

200pin DDR PC2700  2.5v RAM

Ram upgrade information - The NC202i4 takes DDR PC2700 200pin 2.5v RAM modules. Please bear in mind that not all types will be fully compatible. Use the crucial online scanner to see what ram is already installed and the maximum it will take. Once you check your ram part number you can price direct from crucial or use the part number starting CT to find cheaper on eBay:- The following part numbers should be compatible.

256MB - CT3264X335

512MB - CT6464X335

1GB    - CT12864X335

Ram and battery can be accessed under the keyboard